Product performance of primer

Time：2020-11-30 17:08:28 Source：

1、 Mechanical characteristics and configuration 1. Full simulation of pad dyeing process, test cloth through rolling car, through infrared penetration, pre oven drying, choose whether through baking automatic cloth drop, good production reproducibility. 2. The test cloth is fixed with a cloth clip, which can be used to test more cloth samples at the same time. It does not need to wait too long, and has high efficiency. 2、 Rolling part. 1. The roller is made of high-precision NBR with length of 300 and diameter of ￠ 126mm. 2. Large section film cylinder, strong resistance to rail friction, automatic reset after power failure, no left and right deviation, high reproducibility. 3. The hardness of horizontal roll is 70 ° shore 4. Roll pressure: 0.03-0.6mpa, stable pressure, easy adjustment. 5. Equipped with a set of four position liquid tank, each tank 150cc, convenient conversion. 6. Equipped with safety foot switch. 7. Power: voltage input is 380V / 50Hz. A 370W three-phase motor with reducer. 3、 Infrared penetration. 1. Infrared penetration is composed of 12 400W infrared heating tubes with uniform heat output and high heating efficiency. 2. Infrared work is divided into full load and half load. 3. The input voltage is 220 V / 50 Hz. 4、 Pre drying room and baking room. 1. The pre baking distance is 2000mm and the baking distance is 1700mm. 2. The hot air circulation is controlled by the quantity temperature control meter, and the control accuracy is ± 1-2 ℃. 3. The working temperature of pre drying is 20 ℃ - 150 ℃. The heating power is 9kw and the heating speed is fast. 4. The baking temperature is 20 ℃ - 240 ℃. The heating power is 9kw and the heating speed is fast. 5. The cloth can be removed automatically after pre baking and baking, which is reliable and safe. 6. The power of pre baking fan is 0.75KW. Direct control of heating speed, frequency control. 7. The motor and control parts are made of high-quality components with reliable performance and durability. 5、 Complete machine. 1. They are all made of high quality SUS304 plate. 2. Equipped with a set of control box. 3. The main drive is stainless steel chain and clamp. Motor frequency control, arbitrary adjustment. Easy to operate. The power is 0.75KW. 4. One air pressure gun equipped with water spray gun. 5. The power of the whole machine is 25kW, and the voltage input is 380V / 50Hz. 6. The weight of the whole machine is about 2500 kg. 7. Overall dimension: 3400 mm (length) × 1300 mm (width) × 3300 mm (height).